Setting SBTi Targets in 2026: Why a Validation-Ready GHG Inventory Must Come Before Target Setting
- October 5, 2026
- Posted by: PQS_Mitra_Main_Access
- Categories: Environmental Social and Governance (ESG), SBTi


Setting a Science Based Targets initiative (SBTi) target is sometimes treated primarily as a mathematical exercise: establish a base year, apply the appropriate reduction pathway and submit the resulting target.
In practice, one of the most difficult parts occurs before target calculation begins. The organization must establish a greenhouse-gas inventory that is sufficiently complete, correctly categorized and internally consistent to support the target boundary submitted for validation.
For organizations preparing targets in 2026, the important technical principle remains unchanged: a credible science-based target depends on a defensible emissions baseline. Boundary errors, incomplete Scope 3 screening, unsupported renewable electricity claims or inconsistent target coverage can create validation questions even when the reduction percentage itself is mathematically correct.
This is why SBTi preparation should begin with inventory quality and target architecture rather than with the final target percentage.
1. Start With the Organizational Boundary
Before calculating a target, the company must clearly determine what operations are included in its greenhouse-gas inventory.
The selected organizational boundary affects Scope 1 emissions, Scope 2 electricity consumption, leased assets, subsidiaries, joint ventures, company vehicles, generators, heating and cooling systems, and relevant Scope 3 activities.
A frequent problem occurs where financial, operational and GHG reporting boundaries have evolved independently. For example, a company may have added new offices, manufacturing units or subsidiaries while its historical GHG inventory still reflects an older organizational structure.
Before SBTi submission, the inventory should therefore be reconciled against the organization’s current operating structure and the chosen consolidation approach.
2. Scope Classification Must Be Technically Correct
Correct classification matters because SBTi targets are structured around emission scopes.
Typical Scope 1 sources include direct fuel combustion, owned or controlled vehicles, refrigerant leakage and other direct emissions from controlled operations. Scope 2 covers emissions associated with purchased energy such as electricity. Scope 3 addresses indirect value-chain emissions through applicable categories such as purchased goods and services, capital goods, fuel- and energy-related activities, transportation, business travel, employee commuting, leased assets, use of sold products and investments.
A source being physically located at a leased site does not automatically mean it belongs to Scope 3. Classification depends on the organizational boundary, operational control and the nature of the activity.
This is one reason GHG inventories developed only for disclosure purposes sometimes require additional technical review before they are suitable for SBTi validation.
3. Scope 2 Requires More Than an Electricity Bill
Scope 2 calculations require careful treatment of purchased electricity and any contractual renewable-energy claims.
Organizations should maintain clear records for purchased electricity consumption, grid emission factors, renewable electricity arrangements, contractual instruments, location-based calculations, market-based calculations where applicable, and the reporting year associated with each factor.
Where a renewable-electricity claim is being made, the organization should verify whether the underlying contractual instrument satisfies applicable quality criteria rather than assuming that any “green electricity” arrangement can automatically reduce market-based Scope 2 emissions.
The calculation method, reporting boundary and supporting evidence should remain reproducible from source data to the final tCO2e figure.
4. Scope 3 Screening Is Often the Critical Stage
For many companies, the majority of total emissions occurs in Scope 3. A Scope 3 screening exercise should determine which categories are relevant and quantify them using an appropriate calculation method.
Common data sources include procurement spend, material quantities, supplier-specific emissions, logistics records, employee travel, capital expenditure, waste quantities, commuting surveys, leased-asset information and product sales data.
The challenge is not simply identifying emission factors. The calculation should preserve a clear audit trail from activity data to calculation method, emission factor, source, unit conversion and final tCO2e result.
Without that traceability, validator questions become significantly harder to answer and future inventory recalculations become inefficient.
5. Check Whether the Base Year Is Representative
The base year becomes the reference point against which future reduction is measured. Organizations should therefore assess whether the proposed year is representative of normal business operations.
Questions to consider include whether production was unusually low, a major facility was closed, the company was undergoing restructuring, emissions were materially affected by abnormal events, significant operations were later acquired or divested, or sufficient base-year data exists for future recalculation.
Selecting a base year simply because data is readily available can create complications later if the organization grows or the inventory boundary changes substantially.
The base year should be technically defensible, documented and capable of being recalculated where material structural changes occur.
6. Target Coverage Must Match Inventory Coverage
One of the most important validation checks is the relationship between the reported inventory and target boundary.
Organizations should prepare a reconciliation showing total Scope 1 emissions, total Scope 2 emissions, emissions included in the target, exclusions if any, total Scope 3 emissions, Scope 3 categories included, excluded categories and the rationale for each treatment.
This should be reviewed before target language is finalized. A mathematically ambitious target can still face validation issues if the underlying boundary, exclusions or coverage are inconsistent.
A simple inventory-to-target reconciliation table can therefore be one of the most useful internal controls in the entire submission process.
7. Sector-Specific Requirements Must Be Checked Early
SBTi provides cross-sector standards and develops sector-specific guidance and pathways for selected industries.
Companies operating in sectors covered by specific requirements should determine applicability at the beginning of the project rather than after the target has already been calculated.
Sector requirements can affect target methodology, emission boundaries, required metrics and decarbonization pathways. Early applicability review helps prevent rework and ensures that target architecture reflects the relevant technical framework from the start.
8. Validation Readiness Requires a Technical Evidence File
Before submitting targets, organizations should maintain a structured validation file containing, as applicable, the GHG inventory report, organizational boundary, base-year calculations, Scope 1 activity data, Scope 2 data and emission factors, Scope 3 calculations, category-screening rationale, emission-factor sources, renewable-energy evidence, recalculation methodology, target calculation worksheets, growth assumptions where relevant and reconciliation between inventory totals and submitted targets.
The objective is straightforward: another technically competent person should be able to understand how the inventory and target were developed without depending on undocumented assumptions held by one employee or consultant.
This evidence file also makes it easier to respond consistently to validator questions and maintain continuity in future reporting years.
9. Target Approval Is Only the Starting Point
A science-based target has limited practical value unless the organization has a credible implementation plan.
Once targets are established, companies need to translate them into operational levers such as renewable electricity, energy efficiency, fuel switching, fleet electrification, refrigerant management, low-carbon materials, supplier engagement, logistics optimization, product redesign and procurement requirements.
Each major decarbonization lever should ideally have an owner, implementation timeline, expected reduction contribution and monitoring mechanism.
This turns the target from a disclosure commitment into a management programme that can be tracked against annual GHG performance.
From GHG Calculation to Target Architecture
Organizations preparing for SBTi should avoid beginning with the target percentage.
Start with the inventory. Confirm the boundary. Recheck emission sources. Validate classifications. Review factors. Assess Scope 3 completeness. Confirm the base year. Reconcile target coverage. Then finalize target architecture.
PQSmitra supports organizations in reviewing GHG inventories for SBTi readiness, mapping emission sources against GHG Verification Protocol requirements, checking Scope 3 categories, reviewing emission factors and calculations, developing target architecture and supporting organizations through validation queries.
The technical objective is not merely to submit a target. It is to ensure that the target can be traced back to a defensible, reproducible GHG inventory and translated into measurable decarbonization action.
Technical Reference Note
- SBTi corporate target-setting and net-zero requirements should be checked against the version of the SBTi standards and criteria applicable at the time of submission.
- GHG inventory boundaries, Scope 2 accounting and Scope 3 categorization should be aligned with applicable GHG Protocol requirements and documented calculation methodologies.
Leave a Reply Cancel reply
Kindly submit a business inquiry online and we will get back to you!
OR
Call us on +91-9820204373
